Table of Contents
What is RC mode on Olympus?
You can take wireless flash photographs using the built-in flash and a special flash with a remote control function.
How do I reset my OMD em5?
Hold [menu]+[ok] together for a few seconds to get the hardware reset screen. [ok] to proceed. You’ll know that the reset is successful if the time and date need setting when you next power the camera up.
What is RC mode?
Rudder is controlled by the “rudder pedals” and the Throttle is controlled with the pilot’s left hand on the side of the cockpit. A Mode II RC transmitter controls the aileron (roll) and elevator (pitch) with the right hand, while the rudder (yaw) and throttle are controlled by the pilot’s left hand.
What is fill flash?
Fill flash is a technique photographers use to brighten deep shadowed areas, especially on gray days or extremely sunny sessions. As the term suggests, fill flash adds light to deep shadows cast harsh lighting. You can use fill light whenever the background is brighter than the main subject of the photo.
How do I reset my Olympus lens?
Instructions are to shut off camera, lock and remove lens, re-install lens but do not unlock. Turn on camera. Go to reset in menu and follow instructions.
What is Mode 1 and Mode 2 in RC?
A Mode 2 RC transmitter controls the aileron (roll) and elevator (pitch) with the right hand, while the rudder (yaw) and throttle are controlled by the pilot’s left hand. Mode 1 moves the throttle function to the right stick and the elevator control to the left stick.
What is the difference between flash and fill flash?
The slower shutter speed allows ambient light to brighten the background. A fill flash is used to brighten shadow areas in a picture caused by bright light in the background of the subject. This is useful on sunny days where the faces of your subject are shadowed due to harsh sunlight in the background.
Does OMD EM5 have focus peaking?
The short answer is no, the EM5 does not support focus peaking.
What is Olympus Focus Peaking?
Focus peaking highlights objects using color outlines. This makes objects that are in focus easier to see during manual focus operation. You will find this by pressing the Menu button on the back of the camera.
How do I reset my Olympus camera to factory settings?
To reset the camera go to Menu > Reset and all the initial settings will be restored. Go to Menu > Shooting Menu 1 and select Reset.
How do I change the flash settings on my OM-D E-M5?
Most of these settings assume the flash is in TTL-A mode except where noted. The first flash settings I’m referring to on the OM-D E-M5 are found in Custom Menu F. Press the MENU button, scroll down to the Custom Menu (the cogs), press ► then scroll down to custom menu F and press ►.
What kind of Flash does the canon E-M5 have?
Finally, the E-M5 supports four-channel wireless flash with the bundled strobe acting as a master, and off-camera flash strobes configured in up to 4 groups. A weak flash despite being external, with narrow coverage. Coverage and Exposure.
What strobes are compatible with the E-M5’s Hot Shoe?
The E-M5’s hot shoe is compatible with the FL-50/FL-50R, FL-36/FL-36R, FL-20, FL-14, FL-300R and FL-600R strobes. Flash sync is possible up to 1/250 second depending on the flash, and the E-M5 also allows Super FP flash up to 1/4,000 second, if supported by the attached flash.
What is the best shutter speed for the E-M5?
The X-sync is the fastest shutter speed you can use with the flash without switching to FP mode (I will cover FP mode later). If you are using the FL-600r on the camera you can only sync up to 1/200, but I keep the x-sync all the way up at 1/250 anyway. The E-M5 will sync at 1/250 with the clip-on FL-LM2 flash.