Table of Contents
Where is the valet button on a remote starter?
Typical locations for valet switch: Under the driver’s side dash (mounted in the under-dash covering trim panel or wire-tied to a harness) Mounted in the driver’s side kick panel.
How do I reset my Excalibur remote starter?
Turn the ignition key “ON” (do not start). Press the valet button 5 times within 5 seconds of step 1. Press & release the “lock” button on each transmitter one after the other.
What does enable valet mode mean?
The valet switch allows you to temporarily bypass all alarm functions, eliminating the need to hand your transmitter to parking attendants or garage mechanics. When the system is in valet mode, all alarm functions are bypassed, however the remote panic feature and remote door locks will remain operational.
What is valet mode on autostart?
Valet mode is a setting/feature your remote starter has, that allows you to disable the ability to remote start the vehicle. It is designed to be used when you take your vehicle in for service or if you are lending the vehicle out and wish to prohibit (ie turn off) the ability to remote start the vehicle.
What is the valet button?
What is the valet program button?
What is the valet switch?
What does valet button look like?
Here we have some examples of the valet button/switch: It is usually located under the dash on the driver or passenger side. It is a plastic box with wires coming out of it. It will have plugs where the wires go in it. It may have two to four plugs.
How do I turn on valet mode?
To activate it from within the car, tap your profile name on the display screen. A drop-down menu will appear, select the last tab labeled “Valet Mode.” you will be prompted to enter a four-digit PIN the first time you enable Valet Mode. Once the PIN is entered, the screen will display that Valet Mode has been enabled.
What is the valet button on a remote start system?
Note that some systems have a button and a switch and this usually indicates it is a remote start system where the toggle switch is used simply to turn remote start functionality on and off. In those cases the button is the valet button (also known as override button or programming button.)
What is a valet button on a switch?
In those cases the button is the valet button (also known as override button or programming button.) Also, it’s good to know that on the toggle switch style valet switches, the position which has a small notch in the metal is the OFF position. Why do you need a valet mode?
How do I enter or exit valet mode on my vehicle?
To enter or exit valet mode, disarm the system with a working transmitter, your personalized manual override code, or using the procedure below which is to enter or exit valet mode. 1. Enter the vehicle & insert then turn the ignition key to the ON position. 2.
Do I need to mount the valet switch?
Installer’s best practices dictate that the valet switch should be mounted but many don’t follow best practices. Lot’s of older systems use a toggle switch as shown in a few different pictures.